Solar power is the natural source to produce electricity. People with love in Eco friendly concepts. Can build their own solar panel kit. There are no emissions from this solar panel kit so it is a good idea to build your own solar panel kit at home. It is easy to build your own solar panel kit which is pollution free to the environment. One need to worry about current bills, they can simply install this kit and use it for household uses. Just a reasonable price to build your own solar panel kit. The process is very simple purchase items, make a layout, start arranging cells, solder it, make connections with bus wire, measure the voltage, once it has installed the kit on the terrace. Here are the steps to build your own solar panel kit.
List out materials to purchase to build your own solar panel kit.
Here are the items that one would require while constructing the panel, i.e. a Solder with a soldering iron, flux, saw to cut the box, wooden board for the box, glass to protect the cells, solder paste, to test the voltage and amperage one should have a millimeter, solar cells without these we cannot build a solar panel kit, other screws, a pencil, a tape, glue. One should have a proper roof to fix this panel kit. So it is better to arrange the foot rest or a stand for this solar panel kit. It is better if one could collect these items if it is available at home, cells and millimeter can be purchased from the market.
Build the panel
For a cost saving project one can go with polycrystalline solar cells. Just make a sketch of your panel. Ideally, one must require 25inchesX54inches to produce 12V which contains 36 solar cells. Make sure one should build the wooden box according to the panel size. After having a clear idea. With the solder start soldering all the wires of cells and then with each other. Then connect the solar cell series. The principle is to solder the lead to negative side of the cell. Then take the board and paste the cells to it, one can even also make a frame and just insert into in the board. Do not forget to drill holes in the panel to fit the wires in the holes.
Then make the connections to bus wire, the next step is to connect the bus wire in parallel connect the bus wire with positive and negative side of lead, this will lead to increase in amperage. Then take millimeter measure the voltage also measure the amperage. As per demonstrated experiment it should be 108W at 9 amps. One can even increase the quantity of solar cells till the desired current is obtained. But make sure this experiment is successful and handle it carefully. Isn’t it simple, so one can follow this process and build your own solar panel kit. All one need to do is check the number of cells and output how much he/she would require.
Therefore, it is understandable that all these techniques and discussion regarding building their own solar panel kit can help one create and build your own solar panel kit easily with low cost.