To build your own solar panel cheap, these materials are required. They are battery cells, a board through which current cannot pass, a wire, a pen to mark, a knife to cut strips. Purchase cells that are required to produce electricity, according to the output. These cells can be easily destroyed so it is necessary to take care while purchasing. Mark the lines on board as per the panel layout. To connect the cells in array one must cut the wire and frame it. Solder the cells with equal squares on it. One can purchase all these items in online shopping to build their own solar panel.
First of all, to build your own solar panel cheap, Paste the cells on the cutting board. Make sure that the wire passes in between the cells and around the cells. Connect the two panels with flux entire the longitudinal path of the board. Make sure each and every cell is connected. A wire should be a bit longer so that it extends and connected between the gap in the boards. And solder the two wires with bus wire. The first row wire is now should be connected with other row with bus wire. Connect all the wires together. After completing connecting all wires at the end connect with a bus wire. The process is simple one who can build your own solar panel cheap.
First of all, to build your own solar panels cheap, take a square box, leaving gaps at the edges. Take dimensions as per the panel also leave space for wires. Using paint, screws, saw to cut the wood and build the panel box. Fix the both pieces of wood with screws. Make sure appropriate quantity of screws used for joining. Paste the solar panel to the panel box, make sure the face of the panel is exposed to sunlight. Make sure the paint which used must be durable and should not the effect the cells in the panel is effected.
First of all, to build your own solar panels cheap, now connect the bus wire to a diode the umpire should be higher that the panel. Make sure the diode connects to the negative point of the panel. The black wire should connect to the terminal block on the side of the panel box. To the other end of the box connect a white wire from the bus wire. Now a charge controller is required, it should be connected to the panel, the wires from the terminal box to be connected to charge the controller. The positive and negative should be connected properly. Connect the controller to the battery. Use the battery available to you to build your own solar panel
First of all, to build your own solar panels cheap, now a plexiglass should be cut to fix in the panel. Prepare blocks stop that fits into the panel and glue it. Now mount the plexiglass on the block. Now have to seal the entire box. An angle is required to increase the sun rays that it gets exposed. Also can mount the entire system on a stand or on a roof. So that it gets enough light and supply enough electricity for appliances. This helps one in building your own solar panel.
And the bottom line is that it is very easy to build your own solar panels cheap, if someone follows all the above mentioned steps.