People started using solar energy, since it is cheap and eco-friendly for the environment. It is renewable energy. One need not worry about the electricity bill. These solar panels save lots of energy. One can use these panels for water heaters, lights, charging for electronic appliances. Even in big industries this energy can be used. One can use it as alternate resource. One can even get benefits from the government, with this innovative cost effective idea. One only has to bare the installation cost to fix the solar panel kit and save money and supply power to household appliances.
Steps to build your solar panels cheap
The materials required to build your solar panels cheap are a soldering iron, pre-tinned ribbing, one can use core solder, a multi-meter, a glass with flat surface available in the home. The solar cells can be connected in parallel, this increases amperage and voltage. The batteries connected in series will be glowing with flashlights. One needs to separate the cells that are in series. So that one can connect same size. Generally the back side of the panel, which is positively connected to negative on front side. Wrap the entire equipment after wiring everything is done and mount it on board and make sure it gets enough sunlight, thus produces about 35 watt output
Max output from broken solar cells
This is about preparing solar panel. One needs to arrange solder of 15-26 Watt. One can use rosin core solder to take care while you purchase solder avoid silver which might be expensive, instead prefer rosin. You may purchase all the materials from the market, through online or things available at home. One can build your own solar panel cheap. Arrange the cells in order of the same size. And then solder the leads. Connect the series of the panel. Now one has to seal the entire cells, which are open out, after taping everything is done. Then fix a Flexi glass. This is one build your own solar panels cheap.
Pop cans to build solar panels
One builds a solar panel out of pop cans even. When it is sunny day we can see the cans get heated easy. All one need to cut the wood with proper dimensions. The solar rays collected is also used which is insulated with rock wool. The cans are painted with black paint so that it absorbs more heat. The top of a pop can is removed. Then place all cans side by side and then glue them. These are places in aluminum box which absorbs and exit heat. Now the panel is fixed with plexiglass. The solar collector generates heat. The heat must be controlled, which gives an output of 2KW. Which is sufficient for household. This is also the best way to build your own solar panel cheap.
All one need to do is to plan the layout, purchase materials at cheap, try to collect from scrap unused things left at home. Take care while cutting woods, make sure you do not hurt yourself with pliers when cutting those can top.
Therefore, these all things will help one understand the various methods or techniques to build your own solar panels cheap.